Cut and spray paint the background panel.
"Rough in" the Lettering.
"Build up" the lettering.
Cut out the lettering.
Dry fit the lettering on the background panel.
Using the back side of the background panel as a work surface, spray some fun color on the top of the lettering.
Spray a complimenting fun color on the bottom of the lettering.
Using the "finger-pull" method, "Marker-in" a nice pin stripe around the edge of the lettering.
Mount the finished lettering onto a sheet of white foam core board.
Cut around the lettering, leaving a half inch of white foam core board.
Mount that onto the background panel, and then mount the whole works onto a sheet of black foam core board. Then cut around the whole thing leaving a half inch of black foam core board.
Add some cute little Easter eggs and DONE!
Close up right
Close up left.